ORing Switch Model |
RGS-PR9000-LV |
RGS-PR9000-HV |
|
Slot Number |
4 (up to 3 slots for 8x1G port and 1 slot for 4x10G port) |
||
Technology | |||
Ethernet Standards |
IEEE 802.3 for 10Base-T |
||
MAC Table | 8K | ||
Priority Queues | 4 | ||
Processing | Store-and-Forward | ||
Switch Properties | Switching bandwidth: 128Gbps Max. Number of Available VLANs: 256 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define |
||
Jumbo frame | Up to 10K Bytes | ||
Security Features | Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) Single 802.1x and Multiple 802.1x MAC-based authentication QoS assignment Guest VLAN MAC address limit TACACS+ VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Web and CLI authentication and authorization Authorization (15 levels) IP source guard |
||
Software Features |
Hardware routing, RIP and static routing
|
||
Network Redundancy | O-Ring Open-Ring O-Chain MRP MSTP (RSTP/STP compatible) |
||
RS-232 Serial Console Port | RS-232 in RJ-45 connector with console cable. 115200bps, 8, N, 1 | ||
LED Indicator | |||
Power Indicator (PWR1/PWR2) |
Green : Power LED x 2 |
||
System Ready Indicator (PWR) |
Green : Indicates that the system is ready. The LED is blinking when the system is upgrading firmware. |
||
Ring Master Indicator (R.M.) |
Green : Indicates that the system is operating in O-Ring Master mode. |
||
O-Ring Indicator (Ring) |
Green : Indicates that the system is operating in O-Ring mode. |
||
Fault Indicator (Fault) |
Amber : Indicates unexpected event occurred |
||
Reset To Default Running Indicator (DEF) |
Green : System resets to default configuration |
||
Smart LED Display System |
Link/Act(LNK) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4 Mode select (MODE) : Link/Act(LINK) / Speed(SPD) / Duplex(FDX) / Remote (RMT) mode select button Port 1 ~ 28 Link/Act LED show : Green x 28 |
||
Fault contact | |||
Relay |
Relay output to carry capacity of 1A at 24VDC |
||
Power | |||
Redundant power input modular | Dual 24/48VDC (20~72VDC) power inputs at terminal block | Dual 88~264VAC/100~370VDC) power inputs at terminal block | |
Power consumption (Typ.) |
46 Watts |
|
43.5 Watts |
Overload current protection | Present | ||
Physical Characteristic | |||
Enclosure |
19 inches rack-mountable |
||
Dimension (W x D x H) |
440 (W) x 325 (D) x 44 (H) mm (17.32 x 12.8 x 1.73 inch) |
|
440 (W) x 325 (D) x 44 (H) mm (17.32 x 12.8 x 1.73 inch) |
Weight (g) |
6450 g |
|
6600 g |
Environmental | |||
Storage Temperature |
-40 to 85°C (-40 to 185°F ) |
||
Operating Temperature |
10G SFP+ module absent : -40 to 70°C (-40 to 158°F ) |
||
Operating Humidity |
5% to 95% Non-condensing |
||
Regulatory approvals | |||
Power Automation | IEC 61850-3, IEEE 1613 | ||
EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
||
EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 | ||
Warranty | 5 years |
Описание
Oring энергопромышленный неуправляемый коммутатор для объектов энергетики RGS-RP9000-HV